For shooters, hunters, and marksmen, proper sighting is the key to accuracy. One common question is: which way should you turn the adjustment knobs when sighting in a rifle scope? Understanding this not only saves time and ammo but also ensures consistent precision in the field.
Most rifle scopes feature two main adjustment turrets:
Elevation (Up/Down) – usually on the top, controls the vertical movement of the reticle.
Windage (Left/Right) – usually on the side, controls the horizontal movement of the reticle.
Both turrets are marked with directional indicators like “UP / DOWN” and “L / R” or “← / →”.
Elevation (Up/Down): If your shots are hitting low, turn the elevation turret UP. If shots are hitting high, turn it DOWN.
Windage (Left/Right): If your shots are hitting left, turn the windage turret RIGHT. If shots are hitting right, turn it LEFT.
Remember: you are moving the point of impact (POI), not the reticle itself.
Start at 25 or 50 yards to get on paper before moving to 100 yards or more.
Make small adjustments—typically, one click equals ¼ MOA (about 0.25 inch at 100 yards).
Stabilize your rifle using a bench rest or sandbags to minimize human error.
Use quality optics—a clear and precise red dot sight or rifle scope ensures faster adjustments and better accuracy.
When sighting in a rifle scope, always follow the directional markings on your scope’s turrets. Turning them the correct way ensures that your adjustments match the bullet’s point of impact. With patience, proper technique, and reliable optics, you’ll achieve consistent precision in every shot.